05-26-2024, 06:02 PM
Im in the belief that if we have a toroid transformer, 100 turns on one side and 100 turns on the other side, that is we apply an ac current in the primary, that only the windings that are in the hole of the toroid are interacting with eachother, not much of the sides of each coil or the outer side of each coil.. It all mostly happens in the middle hole.. Most of the windings of each coil are just added resistance..
Lets say we have 100 turns, 10in dia air core.. If we only induce 2in of that coil on its circumference of 31.4in, and the driver coil has 100 turns, what would be our output of the 10in coil if we input 10vac? 10v? Well what if we induce another 2in section of the 31.4in circumference winding with another 100 turn coil with the same 10vac.. Another section of the 10in coil say half way around or 1/4 way around. Somewhere not near the first coil, just to say they do not interfere with one another.. Now, 2 10vac induction points on the 10in coil.... What is the output of the 10in coil now? Will those 2 10vac induced sections add up to 20v output from the 10in coil? Like 2 10v batteries in series? How about 8 driver coils? Hubbard?
Mags
Lets say we have 100 turns, 10in dia air core.. If we only induce 2in of that coil on its circumference of 31.4in, and the driver coil has 100 turns, what would be our output of the 10in coil if we input 10vac? 10v? Well what if we induce another 2in section of the 31.4in circumference winding with another 100 turn coil with the same 10vac.. Another section of the 10in coil say half way around or 1/4 way around. Somewhere not near the first coil, just to say they do not interfere with one another.. Now, 2 10vac induction points on the 10in coil.... What is the output of the 10in coil now? Will those 2 10vac induced sections add up to 20v output from the 10in coil? Like 2 10v batteries in series? How about 8 driver coils? Hubbard?
Mags