Join us in the search for Free Energy. Share your experiments and discoveries, post your build logs, and discuss.

We have a strict No-Troll policy. So you can post without fear of being ridiculed.

New Members- Check Your Spam Folder For Activation Link

Please read our Rules. Any problems or suggestions- Contact Us

 


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The key to this subject is something that run using no energy to run on
#11
(08-29-2023, 04:13 AM)Shylo Wrote: Thanks for sharing Jim
Hi Tom in the drawing are the two disks covered with wire?
Also is the coil wound on the iron core and sandwiched between the disks?
Last but not least is the magnet stationary since the bolt that goes through it threads into the rotor?
Thanks

There is a photo of the EttCM coil on the Electiric Motor string 
The magnetic goes on the end of the coil and is fixed to the iron core as one complete part
This means that the iron core is now under a permanent magnetic force made be the magnetic on it.
if watts power is On and the direction of the coil poles are such N/S of the coil and N/S of the magnet
The output of the coil could be 5 times that of a normal coil at the same watts input
This makes this possible to build a device that produces more output watts than is input to make it run.
But the key to this is turning OFF the permanent magnetic force so the back Emf goes to Zero
This will be explained many times in many places as I tell how this technology Works
Thanks you, Tom aka. Dr. Wlazlak
Reply
#12
Well: Let's talk about a new / old idea
Using No energy to make the counter reaction energy go the same direction as the Action energy
To Say : for Every action there is an equal and opposite reaction
( when something of mass pushes on something it transfers the energy into that mass. )
The first mass gives up its energy to the next mass
( But something amazing happens: the mass energy is mostly 2 times the amount is applied to make 1 mass of movement total output )
What happens to the other mass
Well: Three wise man checked in to a motel and the inn keeper tells them its 10 dollars each for the one room. So each give 10 dollars for the stay for the night. that is 30 dollars total. some time later the inn keeper thinks was it wise to charge 3 wise men 10 dollars for one room for one night? how about 25 dollars for the night? Ok:
5 dollars divided by 3 ?? how about 3 divided by 3 and as a tip the inn keeper gets 2 dollars-- sounds good -- so now the three wise men paid 9 dollars each for the night 3 times 9 is 27 dollars and the 2 dollar tip is 29 dollars -- what happen to the other dollar? math is confusing.

aka Dr. Wlazlak
Reply
#13
Hi Tom,
I'm glad you're back.
I have a question. Art Porter's Gap motor, Timan's TORQUE FORCE motor, your's EttCM coil, are all saying that the output is greater than the input, but I think what you're talking about is torque, not energy. It is easy for the torque output to exceed the input, such as in a lever system. Is there any way to calculate that the output of energy is greater than the input?
good luck
RhineX 
Reply
#14
Hi Mr. R
I had a wonderful answer to you question but it was lost because it did not post
but the simple answer to your question is
look at the difference in each person's designs
not all ducks look and act the same.
The real answer is ask the right question;
if we are saying torque it is because there is torque as part of what makes
the math of what energy is being made. to show an answer to a question.

Thanks for asking a question; there are better one of course. Tom
Reply
#15
Time has passed, but the thought remains
the question of Torque
why is the term torque used
Lets do the math
Energy = C M
C = time and distance
M = mass or weight
or EttCM looks like E = C M
the tt looks like the = sign --- fun stuff
anyway
torque is = to weigh and distance
but is also refers to motion of speed of a weight at a distance or E = L T
if some weighs .30556 lbs. and is moving at 1800 ft. per minute
this is = to 1 horsepower that is 745.6 watt hrs.
that is 33,000 lbs. lifted 1 ft. in 1 hr.

it is how to figure out how a spinning thing is using up the energy it is using.

Tom
Reply
#16
IMO-  

Convert torque and rpm to horsepower..  Okay...  Now convert horsepower back to electricity... Hmmm...  Guess we got to spin magnetic fields by coils...  How Else?

We can produce 100,000 watts!  Except the source supply just went up 100,000 watts.  Doah..

What good is torque when we apply it against something that is subject to Lenz Law?  When used fully- amplified torque results in equal counter torque while inducing.
Reply
#17
I wonder about that Jim. I’m looking to build either the EttCM motor or Tinman’s torque force motor to spin a 3 phase washing machine motor as a generator and either using one of those phase windings to power that as a second motor or adding another winding on top of an existing winding for that. At least a 2 phase generator, maybe 3.

Since these are pulse motors, I would also like to incorporate the technique described in the Energy gained from collapsing magnetic fields thread.

Using several techniques together may be the way forward.
Reply
#18
Hello, Mr. Cadman,
Jim is a very nice guy, he is interested in protecting everyone on this forum
He contacted me after kicking me out and said he would undo the boot from my point of view that I wanted in the first place.
I told him that I would more than likely not return, and upon my return here you are asking a question - sort of?
Saying you are interested in building a motor thing Mr. Cadman sir.
I am afraid of posting any more strings of technology because I am afraid to do so because, it's so, so - dam deleted
I also told Jim that because of him forum here I have evolved into a new type of transformer generating system
That kicks the whole tech, to a new level
again - thank you Jim for kicking me off the forum and bringing me back on again.
just so I could ask Mr. Cadman to contact me by Email. so that we could talk about
what it may take to build a working unity device that runs on its own power and maybe powers his house also.
like I said, I don't want to step out of line to what may be allowed to be presented on this forum
Even this may be not allowed, I don't know?
anyway my Email - wlazlakt@gmail.com if you want the information to build a working system contact me.
Sorry Jim if this is not allowed,
If the people on the forum are interested in wanting information about things
how do you not get banned? by presenting true information? I can not be sure what can be said?
Note: I have had many people contact me by email to receive information, I ever sent a EttCM coil to a engineer to Australia at my cost so he could see how it worked.
There have been people I have given information all over the world by emails and zoom meetings and such.
once the we are done we the stuff thus ends the contacts, that is how it works.

Thanks Tom Wlazlak - Corinne Technical Design Engineering - yes, I have a business that does Engineering and stuff.
This is how I am self funded.
This is not an advert. I am just saying I am real
Reply
#19
(09-29-2023, 01:28 AM)Mr.Tom Wrote: If the people on the forum are interested in wanting information about things
how do you not get banned? by presenting true information? I can not be sure what can be said?

Since you did not understand the reason- I will paste part of our correspondence.

******************

  1. This forum is Open Source.  If you come telling about some magical shielding you invented but are not prepared to share the recipe- then don’t post about it.  This isn’t Romp-A-Room.  If you want attention about how smart you are- show your work.  But do not brag about “secret knowledge” like a child.
 
     2.  You may not tell the entire board what terminology you deem acceptable.    You can have your preference, and I even offered you a dedicated board so you could do your thing.  If you kept your opinions in your own moderated section- fine.  But there is no jumping into other threads to tell people how to talk.

I am going to unban you now.  If you decide to converse again, I will see you there

*****************

No one is banning you for your beliefs in your technology. But this forum will stay clean of drama and child games.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)