Self-sustaining parametric device

[feb_]

ipynb file for those of us who don't have Excel


   


  Paragenen1.ipynb.zip (Size: 140.4 KB / Downloads: 10)

[feb_]

"In summary, the parametric generator, as described and analyzed herein, rests on a sound scientific
and mathematical foundation for achieving self-sustained, over-unity operation under well-defined
and achievable conditions."


  A Theoretical and Simulated Analysis of a Self-Sustaining Parametric Generator .pdf (Size: 144.79 KB / Downloads: 48)

[stranger]

"By synthesizing the analysis of a single cycle, we can quantify the energy gain. The ratio of the
energy at the end of the cycle to the energy at the start gives the Coefficient of Performance (COP)."

So where is energy comes from ? what is physics behind it ?

[feb_]

The quantum field.

https://www.casimirspace.com/

[feb_]

srt txt English translated for movies


  srt txt English.zip (Size: 6.96 KB / Downloads: 13)

[MKurt]

Do you have a part list for these systems and arduino code to try a replication ?

[Dexter2025]

Hello Dexter2025,

thanks for the excellent document and the build. I am slowly getting into it. But I wanted to ask, you just wrote in the previous message that you can put something on the secondary of the inductance in the circuit. But that will change the Q of the resonant circuit, because it will change the "stored energy" that oscillates, won't that decrease the performance of the circuit? Possibly even extinguishing the oscillation?

I am asking because I made a series resonant circuit with a transformer and I have quite some gain on the primary, when I attach load on the secondary, the gain decreases because the Q decreases.

Thank you very much for your contribution!

Hi

Yes, the resistive load component get looses, so you must do a design the energy gain can be greater than energy looses by cycle

[MKurt]

Hi everyboby,

WARNING MESSAGE !

BE CAREFUL at Dexter2025,
DONT SEND HIM MONEY !

I sent him money for building a device, and since, i have no response for sending the device... but he continues to post status on his whattsapp account, i have some proof that he is scammer.
He says to build machine for low-cost price to help people to get free energy, he got papers i don't know how, but i'm sure he is not the one who write it.

[dgreen264]

I would suggest that this method doesn't work, at least not with switched capacitors.
You have to vary the parameter in such a way that the energy increases. But by switching capacitors you are not changing the energy. You woould have to vary the capacitance while keeping the voltage the same, then you are modifying the amount of energy.

The only practical way to do this is to vary the value of inductance while keeping the current the same. When discharging the inductor you increase L so that there is more energy coming out of it (E =1/2 LI squared). Then reduce L while charging it.

You can do this by having a rotating piece of metal that changes the inductance when in proximity to the inductor. To avoid drag on the rotor, have two identical sets of inductors with a rotating shield between them and then the field will be same from both inductors and will cancel out leaving zero field in the middle where the rotor blade passes.

[dgreen264]

Interesting point regarding parametric oscillations.

According to Bill Alek (Handout3.pdf):

dL/dt has units of OHMS

i.e. A changing inductance has units of ohms, and this can be positive or negative.
So when L is decreasing with time you have negative resistance which is directly energy generation.
The amount of energy produced depends on the speed of the inductance change.

You can arrange the current so it is maximum while L is decreasing to get maximmum energy out.