Don Smith device

[dgreen264]

Could the DS device run off cold electricity?

What is cold electricity..?
From what I've read, gathered and surmised from various sources, this is my understanding/suggestion.
Cold electricity is electricity that has had a 'j' operator applied to it so to speak, so that it is moved 90 degrees orthogonal to this third dimension (x,y,z) and resides in the imaginary plane. So the total world is made up of real (x,y,z) and imaginary (x,y,z).

A spark is capable of flipping electrons from one plane to the other, so they become cold electricity.
Beccause they are in the imaginary plane, they are not measurable by our instruments.

Similarly there must exist 'cold magnetism' which is again rotated by the j operator into the imaginary plane and thus is not measurable by our intsruments, although it still has absolute objective existence.
Some have suggested this could be why there is null field when two like-poles face each other, why in the middle there is no measurable field- because it has moved to the imaginary plane.

Don Smith device- cold eletricity is applied to the coil L1 by means of a spark. It transforms and generates a voltage on coil L2 all using cold electricity.
When you take real (hot) current from L2 this produces real back emf magnetism against L1. But because the input magnetism at L1 is 'cold' and in the imaginary plane, there is no interaction with the primary and hence you get lots of power out for not much real power in. You've got a real magnetic field going against an imaginary field and they never see each other.

More than one person has remarked that electrons spin through 720 degrees: 360 in the real plane and 360 in the imaginary plane, and this ties in with the above.

[Backtorque]

More than one person has remarked that electrons spin through 720 degrees: 360 in the real plane and 360 in the imaginary plane, and this ties in with the above.

How must this be visualized? Don says the same (infinity symbol) but nothing concrete to actually understand it. I believe actual science teaches that a single spin consists of two rotations.

[dgreen264]

There still must be an element related to RF with his designs, though.

He says to put a resistance of a few hundred ohms in the earth lead, and this is indicative of an impedance match to free space (which is 377 ohms).
These are normal RF techniques for radio transmission.

And also the L1 coil is obviously a quarter wave dipole antenna because its wire length is chosen to be.. a quarter wave length.

Which makes me wonder if there are multiple mechanisms by which it obtains a gain in energy.

---

More than one person has remarked that electrons spin through 720 degrees: 360 in the real plane and 360 in the imaginary plane, and this ties in with the above. 

How must this be visualized? Don says the same (infinity symbol) but nothing concrete to actually understand it. I believe actual science teaches that a single spin consists of two rotations.

Since we live in the real plane not the imaginary one, all we can do is visualise it. We can't measure it or see it.

It was Nigel 'Cheese' Cooper who said this and I can't remember the other one.
https://www.youtube.com/watch?v=Dest9EAJiPo

[dgreen264]

Q factor is the most important thing.

A high Q factor is good.
The only downside is that the bandwidth reduces as Q factor increases. 

Q = centre frequency / bandwidth .

At high Q, a slight drift in frequency means the resonance will be lost.

A Tesla coil will drift in frequency as nearby objects alter its capacitance to ground.
Although if it is driven by a slayer-exciter circuit it will still be resonant because it runs at its natural resonant frequency.

 With Don Smith's type devices I would think the frequency would have to be fixed fairly well because otherwise the tuned circuits would be off-resonance if there were too much drift due to temperature etc.

[Backtorque]

Nigel doesn't seem to have anything concrete either.
Imaginary in physics has to do with math and the complex plane, it can be visualized.
Don mentions, when he discussed the setup with a 3rd coil, that it's placed at the top because magnetic flux density is highest, but that's not true, it's highest at the base where current is highest. Placing it at the top will invoke dielectric induction and the coupling is the same as between L1 and L2, eventually he said no coils and magnetic resonance are needed at all, the laser module is enough, probably in a 1 wire fashion and no magnetic resonance.

[dgreen264]

I get it now. So you feed the centre of L2 with the 'kicker' coil, and due to the standing wave on L2 one end is current and one end is voltage.
There are two frequencies here. One that corresponds to the wire length and this is in MHz and ensures that a standing wave is created.
And a lower frequency which is the actual operating signal frequency of the voltage/current in time.

[andy]

Nigel doesn't seem to have anything concrete either.
Imaginary in physics has to do with math and the complex plane, it can be visualized. 
Don mentions, when he discussed the setup with a 3rd coil, that it's placed at the top because magnetic flux density is highest, but that's not true, it's highest at the base where current is highest. Placing it at the top will invoke dielectric induction and the coupling is the same as between L1 and L2, eventually he said no coils and magnetic resonance are  needed at all, the laser module is enough,  probably in a 1 wire fashion and no magnetic resonance.

"Placing it at the top will invoke dielectric induction"
And I think this is the one of th eimportant things related to DSE (Don Smith Effect).
It works like capacitor - when on one plate is put positive, then to other plate flows negative from somewhere (ex. grounding)

   

[Backtorque]

-DC from above image disconnected from capacitor return path making it a one wire system:
Bruce,
A short summary of the testing - four separate units - all identical. 12 Volt in
put into 2000 Volt module through 12,000. Volt diode bridge into heavy duty capacitor. Positive diode bridge connect only with, negative capacitor open - unattached. With the system working check the output at the negative capacitor. With a proper hookup it accesses an endless energy source.
DS

07-14-2004
Bruce,
The Device in question is the same one I demonstrated at the Tesla convention 5
years ago that caused such a ruckus. The Inverter circuit already has the necessary components required. Disconnect the main diode bridge negative output from the output capacitor bank. Then hook the disconnected negative capacitor to a separate circuit which powers the load and into an adjustable earth grounding. At this point you are tapped into the universal source of endless energy. There is a simple way which does not require the inverter. Any how let me know and will work it out. You already have all the required parts as does most everyone else.
Regards, DS

07-23-2004
Bruce,
Wipe out 6, 7 and 8 and connect the diode bridge where #6 was. Number one is a tritium battery with half life of 11 years, small size. The output appears to be pulsating DC but is actually high frequency which explains the ill matched light bulbs.
Regards, DS
08-02-2004

Bruce,
The plasma tube device dipole with the capacitor plates at right angle get's greater than 65,000 times the input. The energy has to be already there to be seen.
Special Interest try to discredit this type of observation. Since this is energy from the ambient, is high frequency, use a diode bridge with the negative plate as an open circuit. The capacitor transformer opens the door to an endless source of useful energy. I successfully built the device here described. The operation will be Tuesday.
Regards, D.S.
09-02-2004


Darediamond circuit above implemented this with capacitor 7.

---

I get it now. So you feed the centre of L2 with the 'kicker' coil, and due to the standing wave on L2 one end is current and one end is voltage.
There are two frequencies here. One that corresponds to the wire length and this is in MHz and ensures that a standing wave is created.
And a lower frequency which is the actual operating signal frequency of the voltage/current in time.

Exactly. Except, when it's placed at the center, current builds up in the center and opposite voltage at both ends. Input LC resonance oscillates at mhz by a low frequency pulse (20khz), mhz  frequency is  tuned to the frequency that creates  geometrical resonance in the antenna coil L2, forming standing waves with B field multiplication which is coupled to L3 and made into rectified RF which is not useful yet as RF as Don also said.

This is parametric resonance with signal, pump, idler.

The claim of superconductor isn't also exact, when frequency goes up, charge is pushed towards the outside, skin effect, diameter of wire reduces, resistance increases for actual Amp current. The one wire effect has the actual superconductor effect.

---

rf to low freq:

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

---

Two coil coupled to 1 coil in the bottom image seems to be the coils on the right side outside of the top image.

[Backtorque]

Can everyone see Figuera in the bottom image?
The function of the Figuera rotating commutator is fast, short and disruptive pulsing of the 2 coils for strong displacement currents.

[andy]

Nigel doesn't seem to have anything concrete either.
Imaginary in physics has to do with math and the complex plane, it can be visualized. 
Don mentions, when he discussed the setup with a 3rd coil, that it's placed at the top because magnetic flux density is highest, but that's not true, it's highest at the base where current is highest. Placing it at the top will invoke dielectric induction and the coupling is the same as between L1 and L2, eventually he said no coils and magnetic resonance are  needed at all, the laser module is enough,  probably in a 1 wire fashion and no magnetic resonance.

"Placing it at the top will invoke dielectric induction"
And I think this is the one of th eimportant things related to DSE (Don Smith Effect).
It works like capacitor - when on one plate is put positive, then to other plate flows negative from somewhere (ex. grounding)

What we can do with working dielectric induction?

I took following sentences as inspiration not as dogma:
"... Disconnect the main diode bridge negative output from the output capacitor bank ..."
"...  Positive diode bridge connect only with..."
=> Then we can get dielectric induction, when charges are moved from ground, then they charge the capacitor by one  wire 


Food for thought:

Original DSE patent drawing:

   

and its transformation:

   
where Cs is the storage capacitor (from which energy can be dumped to the next stage)

A.