ORION- Released Into the Public Domain

[Jim Mac]

I have been working on a new idea that I think is original.  This one kind of scares me because I think the idea has real potential to work. I have also consulted a few others skilled in the art and the consensus is encouraging.

Before releasing, I needed to make sure the idea was written-up and properly released into the public domain to protect from patent vultures.  

Below you will find the original PDF of the disclosure before notarization, a copy of the notarized seal, and a video giving a brief explanation of the proposed method. I also included the below Youtube video in a zip file so those who wish to further protect the idea can share on their channels on various platforms.

This is now officially released into the public domain and can not be patented.

The WebArchive address of the document before the notary stamped it is https://archive.org/details/orion_202510

The official notarized copy is available in the attached zip 

The PDF Hash is AD43CE82A135E974FD29113B1DEA525976DDDDB2ED465684EFC41841F2ECFE90

This video along with the presented documentation serves as the official timestamp to prove prior art.

For those looking to monetize on this invention, this disclosure does not absolve the duty of verifying possible patent infringements on active patents.
I also have the full notarization process on video, uploaded to several places with undeniable timestamps.

No guarantees are given.

I am in the process of building this now and will post updates here.

[Jim Mac]

Here's where I am at in the build..

Took a treadmill motor armature- Hired a machine shop to part the armature to make 2 armatures on 1 shaft.

It fits a winch housing decently, so removed the permanent magnets, cut them to size on a wet saw with diamond blade, cut the housing down to size, the installed the magnets properly.

3d printed end protection and cured the entire armature in epoxy (except the shaft) to protect the windings.

Now I am working the mount and housing..

Once the housing is done, I will wind the armatures as described in the document.  

Once counter magnetic rotation is verified and established, I will work on the output stator

[Jim Mac]

I am adding these links to this thread before the day expires to further solidify a documented prior art date for anti-patent protection, and so Google and Waybackmachine add these pages to results.  There is no need to follow these links, as they present the same data as above.  

https://archive.org/details/orion_202510

https://drive.google.com/file/d/157pvPNl...sp=sharing
https://drive.google.com/file/d/1rrgdcXM...sp=sharing

https://mcelweemagnetics.blogspot.com/20...netic.html

https://www.youtube.com/watch?v=TVXvdreX31g

I am also attaching the last page of the notarized document here and emailing it to official Gmail address for meta date preservation.

[Jim Mac]

Some updates,  and it's deep!

First, here is the armature all wound..

   

I have the coils connected to the 2nd armature (inducer) physically rotates opposite direction of the rotating magnetic field that is 2X the frequency..

Here is a pic of it partially mounted in a jig-  allowing me to spin it up and test.

   

Now I drill spin it, and hold a small output coil near it and look at the scope output and I see this!!!!

   

Before long, I realized it's working BUT the 2nd armature is pretty close to the stationary magnets  over the first armature.....

   

So the stray magnetism from the magnets over the first armature is affecting the 2nd armature as it rotates!  So that 2nd armature is being fed a rotating field from armature 1's electrical output,  BUT armature 2 is also partially being affected by the permanent magnets remnants, which are trying to reverse the sine.  

What this boils down to is,  to clean this magnetism and output up, I need to ensure the 2nd armature is not exposed to the permanent magnet's fields..

Hopefully this will be good enough to test for input current drop..  BUT this means the field is absolutely rotating in opposite direction as the shaft!

[unimmortal]

Great result Jim! Congrats!! Will be keen to see the scope shot after the generator is shielded...

[Jim Mac]

Upon further investigation, it appears the spikey waveform may be caused by the armature slots...  I held a powerful magnet near the armature while it was spinning and it did nothing to the waveform..  Thus pretty much ruling out stray magnetism causing it...

Since the armature itself is spinning, high reluctance points (the slots) will cross the output coil and cause the drop-outs as it spins.  

Well the results so far are interesting..  I will continue investigating this week

[Jim Mac]

The issue with embodiment 2 is that we are introducing Lenz Drag into the equation on the first armature to create the AC Phases that make armature 2 virtual rotate.  So if there is any speedup effect it would be hidden because armature 1 woukld also speedup it's travels past the permanent magnets, which will drag proportionally.

SO I must move back top embodiment #2.  I have previously built embodiment #2 but I had errors in the pole counts to brushes so I was not able to test.

   

If readers do not understand what I am doing, see this video from 4:00 minute mark till 4:30. 
https://www.youtube.com/watch?v=SkV1RMtlJnk

Connecting a load causes "Speed-Up"..  I have repliocated this and unraveled exactly what is happening here and I feel I can make this speedup effect occur the entire time with no diode.  The build would use no field magnets, but solely rely on the output coils to push the rotor.

Anyway, this morning it seems I found a way that I can make embodiment #2 WITHOUT SPINNING THE BRUSHES!  I am soaking an armature now in epoxy remover so I build it..


I'm psyched about this one

[Jim Mac]

NICE!!!   Speedup Effect CONFIRMED!



There is more going on here I am working out..  If anyone want's to build this and help me probe this in full, PM me.  It's circling the target!

[Jim Mac]

HAH..  Looping one of the outputs to the input SUSTAINS THE MOTOR!



It's not OU yet because I am powering the brushes.  But this is the effect clear as day!

[RafalKielesinski]

HAH..  Looping one of the outputs to the input SUSTAINS THE MOTOR!



It's not OU yet because I am powering the brushes.  But this is the effect clear as day!

Hello from PolandGuests cannot see images in the messages. Please register at the forum by clicking here to see images.
it look great, where any plans how to start build it?